1st — for the first time there will be a 2 for 1 coupon available for those attending the 2013 Portland Boat Show.
2nd — for WEDNESDAY, THURSDAY & FRIDAY the 9th, 10th & 11th, from 5pm to close, 9pm there is N/C (no charge) parking for those attending the 2013 Portland Boat Show.
For a couple attending the show those days we have just saved them $18.00. instead of paying $10.00 per person and $8.00 to park, it will cost 2 people attending W/T/F only $10.00.
Jusk click on the coupon image and print it out on your home computer, present it at the show and save.
Come see us at the show Booth # 212 and see what the World’s Leading Authority on Inflatable Boats can do for you.
Now Available for our Hawaiian Customers needing a great boat at a great price.
The Typhoon 420 Aluminum is the only boat you need to get to that “Secret Surfing Spot”,fishing hole, or if you just want a great boat to dive those Japanese Zeros strewn about the Islands. Great for Molokini Crater snorkel trips or whale watching off the coast.
This offer brought to you by your bruddas on the mainland.
“IBC way da best”
You don’t have to be IBC’s 5 Star Gold Certified Master Mechanic “Dan The Man” to properly care for an outboard. First and foremost become acquainted with your user manual, even if you have owned an outboard before. Technology changes at an ever increasing pace, so read the book. There is nothing worse than a break down, especially if weather is coming in, if you are offshore or in a shipping lane. Familiarizing yourself with the operation and nomenclature of your motor may save you some headaches later on. Annual Check
Everyone operating a boat should have their outboard serviced annually by a qualified mechanic. Seals and impellers can degrade over time and new Ethanol Fuel Blends can render an outboard useless in a matter of weeks. Warning Alarms, spark plugs and wires, upper and lower unit oil, and any other critical items your qualified mechanic and manufacturer recommend should be inspected before you start your boating season. Don’t wait until the last minute before you go boating either. Chances are you’re not the only one trying to get out on the water or trying to get your outboard serviced before the weekend. Flushing Out Your Outboard
ALWAYS FLUSH YOUR MOTOR after using it even if it was only used in freshwater. Flushing attachments are more and more frequently found on the new 4 stroke motors(look at Yamaha’s example), check your owner’s manual to find out if yours has one or not and follow the manufacturer’s instructions. The indefatigable “Rabbit Ears” or flushing attachment fits nearly all motors without built in flushing systems and with the addition of a garden hose complete the package. Ten minutes on the rabbit ears and you’re done. With the problem of invasive species this is a must after every outing. Cooling Discharge
Always check for cooling water discharge out of the “Tell Tale” when you start your motor. If you don’t see any water being discharged from under the cowling or “peeing” as I hear so often, shut down the motor and figure out the cause. Sometimes it’s debris or vegetation covering the intake, sand in the water passages, other times it’s a bad impeller. Today’s modern impellers are manufactured to extremely tight tolerances out of space age neoprene derivatives but they aren’t indestructible. An annual check will tell you whether or not you need to replace your impeller, or the rate of flow from the tell tale outflow pipe (or lack thereof). Remeber if the motor hasn’t been run in several years the impeller can dry out and become brittle thus making it more apt to break apart when run. Fuel
Always , always, always use fresh fuel every single time. Fuel that is left in your tank can begin breaking down in days to weeks. The new E10 fuels available at your local gas station are less effecient and leave unburned contaminants in your motor. If possible use ethanol free fuel from a reputable marine supplier or buy your pump gas from a trusted source. Independent studies have found some dishonest stations watering down their gas beyond the federally allowed 10% to increase their already fat bottom lines. It’s buyer beware so know where the good gas is sold or ask the local fisherman who earn their livelihood on the water. Most manufacturers won’t honor fuel issues in their warranties so be proactive and use the “Good Stuff”! It’s a good idea to disconnect the fuel line and run the motor out of fuel if it isn’t going to be run for any period of time longer than a few days (carburated motors only , never run a fuel injected motor dry unless your manufacturer reccomends it). If you must use “pump gas” use a fuel stabilizing additive such as “Yamalube Fuel Stabilizer & Conditioner Plus” for E10 fuels.
The opinions expressed here are the author’s alone and may not be the opinions of IBC
The new website/store is almost finished and boy oh boy does it look and function good.
When it launches it will be at the old domain www.inflatableboats.com. The parts and accessories sections will have you wondering how you made it this far without ever seeing soo many options. Definitely keep checking back at www.inflatableboats.com as well as here for more updates.tips and tricks and super web specials.
Welcome to the Inflatable Boat Works site, (soon to be joined to the Inflatable Boat Center’s comprehensive web shop). The Inflatable Boat Center is America’s Senior Zodiac Dealership and offers sales and service on most quality inflatable boat brands for recreation, commercial or military use. Stop by our showroom on 2041 SE Powell Ave., in Portland Oregon and see one of our salaried salesmen for all your inflatable boating needs. Give us a call (503)235-2628 with your questions or concerns regarding repair, accessories, new boat models, yacht tender or special projects.